The main function of rubber waterproof plate is to prevent the leakage of liquid and the volatilizing of gas. In rock engineering, waterproof plate is mainly used to prevent seepage and isolate , but it also plays the role of strengthening and protection at the same time. The general width of the waterproof plate 4-6m, weighting from 200 to 1500 grams per square meter. These characteristics ...
Rubber hoses can be divided into these types according to their applications: 1. Rubber hoses for cooling and insulation: This type is usually used for water delivery in horticultural irrigation, building ‘s fire prevention, tank car cleaning, industrial sewage drainage, etc. 2.High pressure steam rubber hose: Generally, the hose is used to cooling water in cooling equipment or engine, and food pr...
The cross section of rubber seal gasket is round and has certain self-tightening effect. The sealing effect is better than the flat gasket and the compressive force is smaller. From the aspect of material, the main products of rubber pad: silicone pad, nitrile rubber pad, fluoro rubber pad, other rubber pad. Rubber pads with oil resistance, acid and alkali resistance, cold and heat resistance, agi...
A rubber bushing is a highly elastomer component that can be made from ordinary rubber. The elastic modulus of rubber bushing is small, and the elastic deformation is large after being loaded, so as to absorb impact and vibration. It can be subjected to multiple loads at the same time, but its high temperature and oil resistance is worse than that of steel bushings. The shape of rubber bushi...
Rubber is widely used in daily life, but some of its elements are prone to external interference and instability, which brings us serious problems in daily use and factory processing. The most obvious problem is the yellowing of rubber. The essence of rubber yellowing is the deterioration of the physical and chemical properties and mechanical properties of rubber in the process of processing, stor...
Raw rubber is elastic and lacks the plasticity necessary for processing, so it is not easy to process. In order to improve its plasticity, it is necessary to plasticize the raw rubber, so that the coordination agent can be easily dispersed in the raw rubber in mixing process. Meanwhile, in the rolling and forming process, it is also helpful to improve the permeability of the rubber into the fabric...
online service
