Rubber is a kind of polymer material with high elasticity, different products have different requirements for different rubber, these requirements have resistance to strength, aging, high and low temperature, oil and so on.The properties of rubber mainly depend on the types of raw rubber used and the different formulations of rubber materials. Natural rubber (NR) has excellent resilience and is ma...
NBR/PVC rubber and plastic blend material The blend of NBR and PVC is the main rubber used in rubber and plastic.This method is the production method commonly used by rubber enterprises. It is simple to operate, low cost and can be changed according to the demand.The main advantages of this blend are both PVC ozone resistance and NBR oil resistance and crosslinking, and has a certain flame retarda...
Classification of rubber Butadiene rubber (NBR) Advantages: excellent resistance to gasoline and aliphatic oils, second only to polysulfide rubber, acrylate and fluororubber, superior to other rubber. Butadiene rubber has good heat resistance, air seal, abrasion resistance and water resistance. Disadvantages: cold and ozone resistance is poor, strength and elasticity is poor, acid resistance is po...
Rubber seal is a kind of general basic element in the sealing device. The high elasticity of rubber plays an important role in the contradiction between leakage and sealing, and it is widely used in daily life.Common seals in our lives have sealing ring, rubber gasket, rubber o-ring, v-ring, y-ring and so on. Rubber has high elasticity at room temperature. It is the only polymer material with high...
The most important characteristics of EPDM are the ability to resist oxidation, ozone and erosion, as well as excellent vulcanization.Among all the rubber industries, EPDM has the lowest proportion. It can absorb a large amount of fillers and oils with little influence, so it can produce rubber compounds with lower cost. By adding EPDM material, it can have higher tensile and tearing strength, hig...
Rubber gasket is to use rubber made after moulding, cutting, acid and alkali resistant, oil resistant, aging resistant, flame retardant, antistatic function, can be directly cut into various shapes of sealing gaskets, flexible cutting shape, is widely used in electronics, food, chemical, pharmaceutical and other industries, is a common life. There are silicone gaskets, nitrile rubber gaskets, chlo...
online service
