A rubber molded product is a product that is made by mixing a mixed rubber blank into a mold and pressed by a flat plate vulcanizer under specified conditions of time, pressure, and temperature, and is called a rubber molded product. Rubber molded products are special products with the most varieties and applications in rubber products. Its characteristics are: easy manufacture, accurate appearanc...
Rubber bellows are also called rubber bellows, rubber sheath, corrugated rubber sleeve, rubber dust cover, rubber corrugated dust cover. Rubber bellows mainly use the expansion and contraction of corrugations to achieve the unique properties of rubber, such as high elasticity, high air tightness, medium resistance, weather resistance and radiation resistance. Rubber bellows are pre-formed with pur...
The choice of seal material is of great significance to its sealing performance and service life. The performance of the material directly affects the performance of the seal. The sealing ring with sealing performance should have the following characteristics: (1) Flexible and resilient; (2) Appropriate mechanical strength, including expansion strength, elongation and tear strength. (3) The perfor...
The wiring harness sheath is widely used in the field of automobile, various mechanical and electronic equipment wiring harness protection. In the existing passenger cars, the wire harness rubber sheath at the door is one of the necessary accessories in the design of the vehicle harness. It is used to seal the door harness at the sheet metal via hole and protect the wires to ensure the related ele...
Rubber tube is a type of tubular rubber products used to transport gas, liquid, slurry or granular materials. It is composed of inner and outer rubber layer and skeleton layer. The material of skeleton layer can be cotton fiber, various synthetic fibers, carbon fiber or asbestos, steel wire, etc. The rubber tube structure is usually divided into: inner rubber layer, outer rubber layer and skeleton...
Rubber dust cover is a car protective equipment to prevent dust from falling on the car. The used positions are mainly distributed in the steering mechanism and the transmission shaft. Other parts are also widely distributed, such as hand brake, foot brake, throttle connection, brake master cylinder, The pump and other parts need to be used. When the rubber dust cover of the ball cage on the axle ...
online service
