The working life of O-ring under dynamic pressure is 5-10 times higher than that of conventional rubber sealing products. Compared with other types of sealing rings, The O-ring has the following advantages: 1.Suitable for both dynamic and static sealing conditions; 2.Suitable for a variety of motion modes: rotary motion, axial reciprocating motion or combined motion (such as rotary reciprocating m...
The leakage of transformer occurs mostly around the gasket, which is mainly caused by the aging and cracking of gasket. The quality of depends mainly on its oil resistance. The poorer oil resistance, the faster aging rate. Especially under high temperature, the aging speed will be faster and easily lead to aging and cracking of gasket, resulting in oil leakage. When overhauling oil-resistant and h...
The cross section of rubber seal gasket is round and has certain self-tightening effect. The sealing effect is better than the flat gasket and the compressive force is smaller. From the aspect of material, the main products of rubber pad: silicone pad, nitrile rubber pad, fluoro rubber pad, other rubber pad. Rubber pads with oil resistance, acid and alkali resistance, cold and heat resistance, agi...
Tetrafluoro-flange gasket is a kind of non-metallic gasket, which is generally composed of two parts: cladding layer and embedded material. The cladding layer is corrosion resistant and is usually made of polytetrafluoroethylene (PTFE) with inserts (fillers) that are more resilient and are usually asbestos rubber sheets. The sealing gasket can be made into V-shape, U-shape and L-shape according to...
A rubber bushing is a highly elastomer component that can be made from ordinary rubber. The elastic modulus of rubber bushing is small, and the elastic deformation is large after being loaded, so as to absorb impact and vibration. It can be subjected to multiple loads at the same time, but its high temperature and oil resistance is worse than that of steel bushings. The shape of rubber bushi...
In order to adapt to different conditions of use and obtain different properties, and to improve the performance of rubber products and reduce the cost, different additives must be added into the raw rubber.Rubber mixing and refining is a process in which the plasticized raw adhesive is mixed with the binder and put in the mixer to make the binder completely and uniformly dispersed in the raw adhe...
online service
