A rubber bushing is a highly elastomer component that can be made from ordinary rubber. The elastic modulus of rubber bushing is small, and the elastic deformation is large after being loaded, so as to absorb impact and vibration. It can be subjected to multiple loads at the same time, but its high temperature and oil resistance is worse than that of steel bushings. The shape of rubber bushi...
Rubber is widely used in daily life, but some of its elements are prone to external interference and instability, which brings us serious problems in daily use and factory processing. The most obvious problem is the yellowing of rubber. The essence of rubber yellowing is the deterioration of the physical and chemical properties and mechanical properties of rubber in the process of processing, stor...
Raw rubber is elastic and lacks the plasticity necessary for processing, so it is not easy to process. In order to improve its plasticity, it is necessary to plasticize the raw rubber, so that the coordination agent can be easily dispersed in the raw rubber in mixing process. Meanwhile, in the rolling and forming process, it is also helpful to improve the permeability of the rubber into the fabric...
In order to adapt to different conditions of use and obtain different properties, and to improve the performance of rubber products and reduce the cost, different additives must be added into the raw rubber.Rubber mixing and refining is a process in which the plasticized raw adhesive is mixed with the binder and put in the mixer to make the binder completely and uniformly dispersed in the raw adhe...
With the increase of room temperature vulcanization materials and the appearance of high temperature vulcanization, the vulcanization temperature tends to two extremes. From the improvement of curing efficiency, it should be considered that the higher the curing temperature, the better. But in fact we can not infinitely increase the curing temperature. Rubber is a high polymer, high temperature wi...
No matter what rubber products, they have to go through the two processes of mixing and vulcanization. For many rubber products, such as rubber hose, rubber tape, tires, etc., it is necessary to go through the two processes of calendering and pressing. For the raw glue with high Mooney viscosity, plastication is needed. Therefore, the most basic and important processing process in rubber pro...
online service
