Rubber composite pipe, generally composed of three layers of structural materials, mainly rubber lining layer, reinforcement layer, rubber coating.Rubber hose is suitable for conveying hydraulic fluid, such as alcohol, fuel oil, lubricating oil, emulsion, etc., in the national defense, chemical, coal and other fields have a large number of applications.Rubber tube uv, ozone, high and low temperatu...
Nitrile rubber is mainly produced by low-temperature emulsion polymerization, with excellent oil resistance, high wear resistance, good heat resistance and strong adhesion. NBR contains acrylonitrile, the more acrylonitrile content, the better oil resistance, but the corresponding cold resistance will decline.It can be 150 ℃ 120 ℃ in air or in the oil medium and long term use. It can be widely use...
NBR/PVC rubber and plastic blend material The blend of NBR and PVC is the main rubber used in rubber and plastic.This method is the production method commonly used by rubber enterprises. It is simple to operate, low cost and can be changed according to the demand.The main advantages of this blend are both PVC ozone resistance and NBR oil resistance and crosslinking, and has a certain flame retarda...
Classification of rubber Butadiene rubber (NBR) Advantages: excellent resistance to gasoline and aliphatic oils, second only to polysulfide rubber, acrylate and fluororubber, superior to other rubber. Butadiene rubber has good heat resistance, air seal, abrasion resistance and water resistance. Disadvantages: cold and ozone resistance is poor, strength and elasticity is poor, acid resistance is po...
The air intake pipe is divided into an intake manifold and an intake manifold. The intake manifold is generally a plastic hose with a larger pipe diameter; the intake manifold is generally cast directly from aluminum alloy with the same number as the number of engine cylinders. Intake pipe refers to the air that enters from the air inlet and passes through the air filter until it enters each cylin...
The main characteristics of fluororubber are high temperature and chemical resistance, good resistance to aging and ozone, and very low air permeability. Even under very severe working conditions, it still has very good wear resistance. Fluorine rubber can withstand an operating temperature of +200 degrees or below, and it can also be operated without oil for a short time. Fluororubber can resist ...
online service
