The choice of seal material is of great significance to its sealing performance and service life. The performance of the material directly affects the performance of the seal ring. According to the material, there are mainly the following types: NBR sealing ring: suitable for use in petroleum-based hydraulic oil, glycol-based hydraulic oil, diester-based lubricating oil, gasoline, water, silicone ...
Rubber molded products refer to the products made by placing the mixed rubber blank in a model and pressing them with a vulcanizer under the specified time, pressure and temperature conditions, which are called rubber molded products. Rubber molded products are the most diverse and widely used special products in rubber products. Its characteristics are: easy manufacturing, accurate appearance, sm...
The rubber sealing gasket basically plays a role of sealing and preventing leakage . The more common raw materials for rubber seals are NR, SBR, NBR, SIL, CR, FKM, etc. Because of the different characteristics of rubber raw materials, it may directly affect the sealing function of the seal, so it is necessary to choose the material reasonably. Rubber sealing gasket not only has the function...
Several Common Rubber Sealing Rings 1.Silicone (SIL) rubber sealing ring The characteristic of this kind of sealing ring is that it has good heat and cold resistance, and can be used stably in some places with high temperature, and it also has excellent corrosion resistance and insulation. The sealing rubber ring is often used in household appliances such as electric water heaters and microwave ov...
Rubber gasket is now the most basic and widely used gasket. It is made of synthetic rubber that vulcanized with polymers, added fillers, pigments and various additives. Synthetic rubber has very excellent compressibility and resilience. Only need very little pre tightening force, this rubber can play a role of effective sealing under low temperature low pressure conditions. Rubber gasket is ...
1.Plate rubber bearing: except under special conditions (cold areas), it has basically replaced the commonly used bearings like linoleum cushion, curved steel plate, reinforced concrete pendulum and other forms. The allowable compressive stress of rectangular and circular bearings is 10MPa, which is suitable for Bridges with small spans. It is not suitable to use spherical crown rubber bearings or...
online service
