1.Plate rubber bearing: except under special conditions (cold areas), it has basically replaced the commonly used bearings like linoleum cushion, curved steel plate, reinforced concrete pendulum and other forms. The allowable compressive stress of rectangular and circular bearings is 10MPa, which is suitable for Bridges with small spans. It is not suitable to use spherical crown rubber bearings or...
O-ring seals are suitable for installation in a variety of mechanical equipment, which seals in specified temperature, pressure, as well as different liquid and gas medium, in the static or movement state. A large number of various types of sealing components are applied in machine tools, ships, automobiles, aerospace equipment, metallurgical machinery, chemical machinery, engineering machinery, c...
The working life of O-ring under dynamic pressure is 5-10 times higher than that of conventional rubber sealing products. Compared with other types of sealing rings, The O-ring has the following advantages: 1.Suitable for both dynamic and static sealing conditions; 2.Suitable for a variety of motion modes: rotary motion, axial reciprocating motion or combined motion (such as rotary reciprocating m...
The leakage of transformer occurs mostly around the gasket, which is mainly caused by the aging and cracking of gasket. The quality of depends mainly on its oil resistance. The poorer oil resistance, the faster aging rate. Especially under high temperature, the aging speed will be faster and easily lead to aging and cracking of gasket, resulting in oil leakage. When overhauling oil-resistant and h...
Rubber foot pad is made of synthetic rubber This type of rubber is a synthetic polymer，usually in a viscous liquid or a solid state that can softened by heat. When heated there is usually a melting or softening temperature range. It can be plastic flow under the action of external forces. So some of its properties are similar to natural resin. Rubber foot pads have the functions of anti-slip, anti...
The characteristics of rubber foot mats are as follows: 1.The material is a high elastic polymer with reversible deformation. This kind of material makes rubber foot pads full of flexibility under room temperature, and below very small external force action they can produce bigger deformation and return to original state after removing external force. Synthetic rubber is a completely amorphous pol...
online service
