The through-hole rubber sheath is mainly distributed at the interface between the engine and the cab, the interface between the front cabin and the cab (2 places on the left and right), the interface between the four doors (or a rear door) and the compartment, and the inlet of the fuel tank,which have the functions of grinding, waterproofing and sealing. The through-hole rubber sheath is a kind of...
Generally, the oil pipes of motorcycles are made of oil-resistant rubber. Rubber is a thermoplastic elastomer and has elastic. Therefore, the fuel pipes of motorcycles are basically universal. Nitrile rubber is the most common oil-resistant rubber. Nitrile rubber is a mixture of acrylonitrile and butadiene. It has excellent resistance to petroleum and non-polar solvents, and it also has good mecha...
EPDM hoses are generally used as delivery pipes, which is divided into conveying hose and suction hose. Various types of cloth inserted hose are made of different materials according to different transmission medium, with reasonable structural design, good quality and durability. EPDM hose is a flexible hose used for conveying or absorbing (negative pressure condition) various liquids fluids...
Rubber gasket is now the most basic and widely used gasket. It is made of synthetic rubber that vulcanized with polymers, added fillers, pigments and various additives. Synthetic rubber has very excellent compressibility and resilience. Only need very little pre tightening force, this rubber can play a role of effective sealing under low temperature low pressure conditions. Rubber gasket is ...
1.Plate rubber bearing: except under special conditions (cold areas), it has basically replaced the commonly used bearings like linoleum cushion, curved steel plate, reinforced concrete pendulum and other forms. The allowable compressive stress of rectangular and circular bearings is 10MPa, which is suitable for Bridges with small spans. It is not suitable to use spherical crown rubber bearings or...
The working life of O-ring under dynamic pressure is 5-10 times higher than that of conventional rubber sealing products. Compared with other types of sealing rings, The O-ring has the following advantages: 1.Suitable for both dynamic and static sealing conditions; 2.Suitable for a variety of motion modes: rotary motion, axial reciprocating motion or combined motion (such as rotary reciprocating m...
online service
