-
Rubber bellows are also called rubber telescopic tubes, rubber sheaths, corrugated rubber sleeves, rubber dust jackets, and rubber corrugated dust jackets. Rubber bellows mainly uses the expansion and contraction of corrugations to achieve the unique properties of rubber, such as high elasticity, high air tightness, medium resistance, weather resistance and radiation resistance. Rubber bello...
-
Rubber flat washer: it is easy to deform and compact, but its pressure and temperature resistance are poor, so it is only used in places with low pressure and low temperature. Natural rubber has a certain acid-base resistance, and the service temperature should not exceed 60 ℃; silicone can also be high temperature resistant and the service temperature is 200 ℃; NBR rubber can be resistant to oil,...
-
The air intake pipe is divided into an intake manifold and an intake manifold. The intake manifold is generally a plastic hose with a larger pipe diameter; the intake manifold is generally cast directly from aluminum alloy with the same number as the number of engine cylinders. Intake pipe refers to the air that enters from the air inlet and passes through the air filter until it enters each cylin...
-
Rubber seal ring is a ring cover composed of one or several parts, which is fixed on one ring or washer of the bearing and contacts with another ring or washer to form a narrow labyrinth. There are O-ring, Y-ring, V-ring and so on, which are used to install on various mechanical equipment, and play a sealing role in static or moving state under the specified temperature and pressure as well as in ...
-
With the application of unleaded gasoline and electrospraying devices in automobiles, the structure of the fuel hose has undergone great changes in the material, and the inner rubber layer has been developed to replace the nitrile rubber with fluororubber, chlorohydrin rubber or acrylate rubber. In order to reduce fuel permeability and further improve heat resistance, the inner layer rubber is mos...
-
The structure and materials of automotive rubber hoses vary according to their use, performance, function, medium used, and ambient temperature. The selection of rubber materials plays a decisive role in the performance of hoses. Automobile hoses are in contact with various media, and the use conditions are harsh and technical requirements are harsh. It is a composite rubber product with many vari...
-
The conventional rubber wire harness sheath generally has a circular hole in the middle of the sheath to pass the wire harness, and then a sleeve or a tail is designed on one side or both sides of the through hole to facilitate binding the wire harness and the rubber sheath with tape. , using the two does not produce relative movement. However, when the vehicle is at a non-uniform speed or the ang...
-
1. Silicone Gasket: Silicone products are widely used in electronics, medical equipment, food and other industries. The rubber type is selected from a variety of domestic and imported silica gels, and the use temperature can meet -60°~+200°. The product can meet the oil resistance, steam resistance, medical edible full transparency, high strength, flame retardant, conductive silicone rubber, etc. ...
-
In many car mat material, rubber and plastic is the most widely used, which mainly benefits from rubber and plastic material itself excellent skid resistance, wear resistance, anti-static, pollution resistance and other properties, an excellent rubber, plastic pad pollution resistance ability, convenient cleaning, by the majority of car owners love and welcome.What need to notice nevertheless is, ...
online service
