With the development of aerospace, automotive parts and medical devices, the requirements for precision and dimensional stability of rubber products in harsh environment are becoming higher and higher.For example, the radiator coolant hose of heavy truck needs to withstand high temperature and high pressure, and the diameter of the hose is generally large, most of which are made of silicone compos...
The rubber seal ring is an annular cover composed of one or several parts, which is fixed on one ring or washer of the bearing and contacts with another ring or washer to form a narrow labyrinth.Type O seal ring, Y seal ring, V seal ring and so on, used for installation in various mechanical equipment, in the specified temperature and pressure and different liquid and gas, in the static or movemen...
Nitrile rubber is mainly produced by low-temperature emulsion polymerization, with excellent oil resistance, high wear resistance, good heat resistance and strong adhesion. NBR contains acrylonitrile, the more acrylonitrile content, the better oil resistance, but the corresponding cold resistance will decline.It can be 150 ℃ 120 ℃ in air or in the oil medium and long term use. It can be widely use...
EPDM is ethylene, propylene, mix a small amount of the conjugate olefin copolymer, is one of the types of ethylene propylene rubber, expressed in EPDM, because its main chain is made up of chemical stability of saturated hydrocarbon, and only in the side chain containing unsaturated double bond, so the ozone resistance, heat resistance, excellent weather resistance and aging resistance, can be wid...
Rubber composite pipe, generally composed of three layers of structural materials, mainly rubber lining layer, reinforcement layer, rubber coating.Rubber hose is suitable for conveying hydraulic fluid, such as alcohol, fuel oil, lubricating oil, emulsion, etc., in the national defense, chemical, coal and other fields have a large number of applications.Rubber tube uv, ozone, high and low temperatu...
From the current consumer consumption of silica gel products, natural silica gel consumption rate is several percentage points higher than synthetic silica gel consumption rate.The market can develop synthetic silica gel products and increase the occupancy rate of synthetic silica gel products. Then the consumption will increase accordingly, and the market space will further increase. Just as the ...
Silicone Gasket Rubber Seals can be divided into two categories: static seals and dynamic seals. Static seal Static seals mainly include three types: pad seal, sealant seal and direct contact seal. According to the working pressure, the static seal can be divided into a medium-low pressure static seal and a high-pressure static seal. The medium and low pressure static seals are generally made of a...
online service
