Air filter hose refers to the section of rubber hose that air enters from the air inlet and passes through the air filter until it is to enter each cylinder. Since the rubber hose is located near the engine, it needs to have the following conditions: 1.High temperature resistance: The rubber hose is directly connected to the engine cylinder head, and the temperature of the engine cylinder head can...
The through-hole rubber sheath is mainly distributed at the interface between the engine and the cab, the interface between the front cabin and the cab (2 places on the left and right), the interface between the four doors (or a rear door) and the compartment, and the inlet of the fuel tank,which have the functions of grinding, waterproofing and sealing. The through-hole rubber sheath is a kind of...
Rubber cushions are generally made of rubber, and are a kind of rubber products used to control the impact and shock from the outside when the rubber rebounds after absorbing vibration. Rubber cushions have different shapes according to different use environments, but it has a feature that is long life when in use, can be used in any environment, corrosion resistance, high and low temperature resi...
Generally, the oil pipes of motorcycles are made of oil-resistant rubber. Rubber is a thermoplastic elastomer and has elastic. Therefore, the fuel pipes of motorcycles are basically universal. Nitrile rubber is the most common oil-resistant rubber. Nitrile rubber is a mixture of acrylonitrile and butadiene. It has excellent resistance to petroleum and non-polar solvents, and it also has good mecha...
Rubber molded products refer to the products made by placing the mixed rubber blank in a model and pressing them with a vulcanizer under the specified time, pressure and temperature conditions, which are called rubber molded products. Rubber molded products are the most diverse and widely used special products in rubber products. Its characteristics are: easy manufacturing, accurate appearance, sm...
The rubber sealing gasket basically plays a role of sealing and preventing leakage . The more common raw materials for rubber seals are NR, SBR, NBR, SIL, CR, FKM, etc. Because of the different characteristics of rubber raw materials, it may directly affect the sealing function of the seal, so it is necessary to choose the material reasonably. Rubber sealing gasket not only has the function...
online service
