Air filter hose refers to the section of rubber hose that air enters from the air inlet and passes through the air filter until it is to enter each cylinder. Since the rubber hose is located near the engine, it needs to have the following conditions: 1.High temperature resistance: The rubber hose is directly connected to the engine cylinder head, and the temperature of the engine cylinder head can...
Generally, the oil pipes of motorcycles are made of oil-resistant rubber. Rubber is a thermoplastic elastomer and has elastic. Therefore, the fuel pipes of motorcycles are basically universal. Nitrile rubber is the most common oil-resistant rubber. Nitrile rubber is a mixture of acrylonitrile and butadiene. It has excellent resistance to petroleum and non-polar solvents, and it also has good mecha...
EPDM hoses are generally used as delivery pipes, which is divided into conveying hose and suction hose. Various types of cloth inserted hose are made of different materials according to different transmission medium, with reasonable structural design, good quality and durability. EPDM hose is a flexible hose used for conveying or absorbing (negative pressure condition) various liquids fluids...
Rubber hoses can be divided into these types according to their applications: 1. Rubber hoses for cooling and insulation: This type is usually used for water delivery in horticultural irrigation, building ‘s fire prevention, tank car cleaning, industrial sewage drainage, etc. 2.High pressure steam rubber hose: Generally, the hose is used to cooling water in cooling equipment or engine, and food pr...
In the process of storage and use of rubber, affect by the environment and human forces, the performance and appearance of rubber changes with time, which is the phenomenon of aging. So what causes rubber to age? There are mainly 7 factors as followed: 1.Oxygen: free radical chain reaction will occur between oxygen and molecules of rubber when molecular chains fracture or over cross linked, which ...
Rubber is widely used in daily life, but some of its elements are prone to external interference and instability, which brings us serious problems in daily use and factory processing. The most obvious problem is the yellowing of rubber. The essence of rubber yellowing is the deterioration of the physical and chemical properties and mechanical properties of rubber in the process of processing, stor...
online service
