The working life of O-ring under dynamic pressure is 5-10 times higher than that of conventional rubber sealing products. Compared with other types of sealing rings, The O-ring has the following advantages: 1.Suitable for both dynamic and static sealing conditions; 2.Suitable for a variety of motion modes: rotary motion, axial reciprocating motion or combined motion (such as rotary reciprocating m...
The cross section of rubber seal gasket is round and has certain self-tightening effect. The sealing effect is better than the flat gasket and the compressive force is smaller. From the aspect of material, the main products of rubber pad: silicone pad, nitrile rubber pad, fluoro rubber pad, other rubber pad. Rubber pads with oil resistance, acid and alkali resistance, cold and heat resistance, agi...
A rubber bushing is a highly elastomer component that can be made from ordinary rubber. The elastic modulus of rubber bushing is small, and the elastic deformation is large after being loaded, so as to absorb impact and vibration. It can be subjected to multiple loads at the same time, but its high temperature and oil resistance is worse than that of steel bushings. The shape of rubber bushi...
The process of converting plastic rubber to elastic rubber is called vulcanization. It is to add a certain curing agent such as sulfur, curing accelerator and so on into the semi-finished products made of raw rubber. In the vulcanization tank in the specified temperature heating, heat preservation of the raw glue between the linear molecules linked to each other into a three-dimensional network st...
Vulcanized elastic rubber is called vulcanized rubber, also known as soft rubber, commonly known as "rubber". Vulcanization is one of the most important technological processes for rubber processing. All kinds of rubber products must be vulcanized to obtain the ideal performance. Unvulcanized rubber in use is not of use value. But insufficient sulfur or curing time is not enough to make...
No matter what rubber products, they have to go through the two processes of mixing and vulcanization. For many rubber products, such as rubber hose, rubber tape, tires, etc., it is necessary to go through the two processes of calendering and pressing. For the raw glue with high Mooney viscosity, plastication is needed. Therefore, the most basic and important processing process in rubber pro...
online service
