Rubber composite pipe, generally composed of three layers of structural materials, mainly rubber lining layer, reinforcement layer, rubber coating.Rubber hose is suitable for conveying hydraulic fluid, such as alcohol, fuel oil, lubricating oil, emulsion, etc., in the national defense, chemical, coal and other fields have a large number of applications.Rubber tube uv, ozone, high and low temperatu...
NBR/PVC rubber and plastic blend material The blend of NBR and PVC is the main rubber used in rubber and plastic.This method is the production method commonly used by rubber enterprises. It is simple to operate, low cost and can be changed according to the demand.The main advantages of this blend are both PVC ozone resistance and NBR oil resistance and crosslinking, and has a certain flame retarda...
Classification of rubber Butadiene rubber (NBR) Advantages: excellent resistance to gasoline and aliphatic oils, second only to polysulfide rubber, acrylate and fluororubber, superior to other rubber. Butadiene rubber has good heat resistance, air seal, abrasion resistance and water resistance. Disadvantages: cold and ozone resistance is poor, strength and elasticity is poor, acid resistance is po...
The air intake pipe is divided into an intake manifold and an intake manifold. The intake manifold is generally a plastic hose with a larger pipe diameter; the intake manifold is generally cast directly from aluminum alloy with the same number as the number of engine cylinders. Intake pipe refers to the air that enters from the air inlet and passes through the air filter until it enters each cylin...
Rubber seals are one of the most commonly used sealing materials and have a very wide range of applications. The sealing ring is mainly used to prevent oil, water and corrosion and seal the gas to prevent leakage. There are many types of sealing rings. Depending on the materials used for the sealing rings, different classifications are generated in nature. Classified by form: O-ring, Y-ring, V-rin...
Generally, the oil pipes of motorcycles are made of oil-resistant rubber. Rubber is a thermoplastic elastomer and has elastic. Therefore, the fuel pipes of motorcycles are basically universal. Nitrile rubber is the most common oil-resistant rubber. Nitrile rubber is a mixture of acrylonitrile and butadiene. It has excellent resistance to petroleum and non-polar solvents, and it also has good mecha...
online service
