EPDM hoses are generally used as delivery pipes, which is divided into conveying hose and suction hose. Various types of cloth inserted hose are made of different materials according to different transmission medium, with reasonable structural design, good quality and durability. EPDM hose is a flexible hose used for conveying or absorbing (negative pressure condition) various liquids fluids...
Rubber hoses can be divided into these types according to their applications: 1. Rubber hoses for cooling and insulation: This type is usually used for water delivery in horticultural irrigation, building ‘s fire prevention, tank car cleaning, industrial sewage drainage, etc. 2.High pressure steam rubber hose: Generally, the hose is used to cooling water in cooling equipment or engine, and food pr...
Rubber is widely used in daily life, but some of its elements are prone to external interference and instability, which brings us serious problems in daily use and factory processing. The most obvious problem is the yellowing of rubber. The essence of rubber yellowing is the deterioration of the physical and chemical properties and mechanical properties of rubber in the process of processing, stor...
Raw rubber is elastic and lacks the plasticity necessary for processing, so it is not easy to process. In order to improve its plasticity, it is necessary to plasticize the raw rubber, so that the coordination agent can be easily dispersed in the raw rubber in mixing process. Meanwhile, in the rolling and forming process, it is also helpful to improve the permeability of the rubber into the fabric...
With the increase of room temperature vulcanization materials and the appearance of high temperature vulcanization, the vulcanization temperature tends to two extremes. From the improvement of curing efficiency, it should be considered that the higher the curing temperature, the better. But in fact we can not infinitely increase the curing temperature. Rubber is a high polymer, high temperature wi...
No matter what rubber products, they have to go through the two processes of mixing and vulcanization. For many rubber products, such as rubber hose, rubber tape, tires, etc., it is necessary to go through the two processes of calendering and pressing. For the raw glue with high Mooney viscosity, plastication is needed. Therefore, the most basic and important processing process in rubber pro...
online service
