EPDM rubber hose is made of EPDM material after thermal vulcanization processing, generally extruded by an extruder (in a few cases it can also be formed by compression molding). EPDM rubber hoses are mainly used in engines, water tanks, radiators of automobiles and construction machinery. The technology of rubber hoses is generally distinguished according to the types of rubber hoses. In general,...
Rubber air hose, also known as the intake pipe, refers to the section of air that enters from the intake port and passes through the air filter until it enters each cylinder. It is the main intake line of the engine and the total intake line. The air pipe is generally made of rubber after processing and vulcanization. The following are the main application characteristics of the rubber air hose: 1...
Rubber hose is a type of tubular rubber products used to transport gas, liquid, slurry or granular materials. According to the main structure of rubber hose products, it can be divided into five categories: cloth hose, braided hose, spiral hose, knitted hose and other hoses. The rubber tube with a reinforcement layer is composed of an inner and outer rubber layer and a skeleton layer. The material...
The silicone hose is added to the twin-roll rubber compounder or the sealed kneader from the raw silicone rubber, and gradually added with white carbon black and other additives to be refined evenly. According to the technical standards of industrial products, the products are made by extrusion. Silicone hose is the carrier for the circulation and coating of liquid, gas and other materials. Silico...
Air filter hose refers to the section of rubber hose that air enters from the air inlet and passes through the air filter until it is to enter each cylinder. Since the rubber hose is located near the engine, it needs to have the following conditions: 1.High temperature resistance: The rubber hose is directly connected to the engine cylinder head, and the temperature of the engine cylinder head can...
Generally, the oil pipes of motorcycles are made of oil-resistant rubber. Rubber is a thermoplastic elastomer and has elastic. Therefore, the fuel pipes of motorcycles are basically universal. Nitrile rubber is the most common oil-resistant rubber. Nitrile rubber is a mixture of acrylonitrile and butadiene. It has excellent resistance to petroleum and non-polar solvents, and it also has good mecha...