Rubber hose is a type of tubular rubber products used to transport gas, liquid, slurry or granular materials. According to the main structure of rubber hose products, it can be divided into five categories: cloth hose, braided hose, spiral hose, knitted hose and other hoses. The rubber tube with a reinforcement layer is composed of an inner and outer rubber layer and a skeleton layer. The material...
The silicone hose is added to the twin-roll rubber compounder or the sealed kneader from the raw silicone rubber, and gradually added with white carbon black and other additives to be refined evenly. According to the technical standards of industrial products, the products are made by extrusion. Silicone hose is the carrier for the circulation and coating of liquid, gas and other materials. Silico...
Air filter hose refers to the section of rubber hose that air enters from the air inlet and passes through the air filter until it is to enter each cylinder. Since the rubber hose is located near the engine, it needs to have the following conditions: 1.High temperature resistance: The rubber hose is directly connected to the engine cylinder head, and the temperature of the engine cylinder head can...
The through-hole rubber sheath is mainly distributed at the interface between the engine and the cab, the interface between the front cabin and the cab (2 places on the left and right), the interface between the four doors (or a rear door) and the compartment, and the inlet of the fuel tank,which have the functions of grinding, waterproofing and sealing. The through-hole rubber sheath is a kind of...
Rubber cushions are generally made of rubber, and are a kind of rubber products used to control the impact and shock from the outside when the rubber rebounds after absorbing vibration. Rubber cushions have different shapes according to different use environments, but it has a feature that is long life when in use, can be used in any environment, corrosion resistance, high and low temperature resi...
Generally, the oil pipes of motorcycles are made of oil-resistant rubber. Rubber is a thermoplastic elastomer and has elastic. Therefore, the fuel pipes of motorcycles are basically universal. Nitrile rubber is the most common oil-resistant rubber. Nitrile rubber is a mixture of acrylonitrile and butadiene. It has excellent resistance to petroleum and non-polar solvents, and it also has good mecha...